M18 Force Logic Press Tool

Press Tool; Type Cordless, In-Line; Input Supply Rating 18 Volt DC, 450 Watt; Capacity 1/2 to 4 Inch; Size 14.17 Inch Length x 3.14 Inch Width x 4.5 Inch Height; Inclusions/Features (1) ONE-KEY, (2) M18 REDLITHIUM CP2.0 Battery, (1) M18 and M12 Multi-Voltage Charger, (1) Carrying Case; Nominal Force Rating 7200 Pound; Calibration Interval 50000 Cycle; Battery Type 18 Volt Lithium-Ion; Cycle Time 4 Second; Operating Temperature Rating 14 to 122 Deg F

14.17" x 3.14" x 4.5", 1/2 to 4" Capacity, 18 VDC, 450 W, 7200 Lb Force, In-Line, Cordless, Press Tool with ONE-KEY/M18 REDLITHIUM CP2.0 Battery
Lightest, In-Line Design for Unrivaled Access; Auto-Cycle Ensures Full Press Every Time; Industry's First Brushless Press Tool; Prepress Battery Check Ensures Tool Won't Start a Press it Can't Complete; Jaws Compatible with Streamline™ ACR Press Fittings; Flame-Free Refrigerant Line Connections; Faster Alternative to Brazing; 1/4 to 7/8 Inch Outer Diameter Capacity; Jaws Compatible with ACR Tube and Line Set; Creates Secure Joints in One Cycle; Monitor and Report Successful Operation from Desktop and Mobile Devices; Only Press Tool with Security Capability; One-Key™ Industry's Largest Tracking Network
Our M18™ FORCE LOGIC™ Press Tool with ONE-KEY™ is the industry's first press tool with remote tracking, management, and lockout and is the smallest, most intelligent press tool on the market. The state-of-the-art press tool features an in-line design and brushless motor, enabling more run-time per charge and faster cycle times while being significantly smaller and nearly 20% lighter than the leading competitor. Like all MILWAUKEE® press tools, the in-line design with a forward hand position unlocks your ability to press with one hand and will fit nearly anywhere you can fit your arm. Equipped with REDLINK™ electronics, the cordless press tool also provides the highest level of press accuracy and reliability available in the industry. Auto-cycle ensures a full press every time and the pre-press battery check prevents the tool from starting a press it can't complete. This press tool is ONE-KEY™ enabled, logging, and uploading data from every press for retrieval via the ONE-KEY™ desktop or mobile app. This allows for performance monitoring and provides you peace of mind in quality connections. With ½"to 4"capacity and compatibility with over 20 unique fitting systems, the plumbing press tool is a comprehensive press solution for plumbers and mechanical contractors.
Nominal Force Rating 7200 Pound; Calibration Interval 50000 Cycle; Battery Type 18 Volt Lithium-Ion; Cycle Time 4 Second; Operating Temperature Rating 14 to 122 Deg F