Skip to main content

SIOUX CHIEF ELECTRONIC TRAP PRIMER

ELECTRONIC TRAP PRIMER

Product Description

Trap Primer

1/2", MPT, 20 to 100 PSI, 120 VAC 60 Hz, 9.2 W, Surface Mount, Electronic, Trap Primer
Sioux Chief 695 Series ETP Electronic Trap Primers Shall be Used where Necessary to Replenish Water in Floor Drain Traps to Prevent Escape of Sewer Gas; Trap Primer Shall be Listed and Certified to ASSE 1044 and Equipped with Solenoid Actuating Device, Vacuum Breaker and Proper Electrical Hardware; Trap Primer's Water Release Shall be Factory-Set for Daily Operation of 2 Ounces of Water and Allow Adjustment of the Frequency and Duration of the Priming Operation; Trap Primer Shall be Equipped with an ASSE 1010 Water Hammer Arrester to Protect the Solenoid Device; Trap Primer Unit Shall Include a Brass Extension Nipple (Not Pre-Installed) to be Used when Additional Length is Needed; Trap Primers Not Including an Access Box can be Used in Conjunction with Various Accessories within the 695 Series (Distribution Splitter and Wye) to Prime up to 8 Drains; The Number of Traps Serviced by any Trap Primer is a Function of Activation Frequency and Evaporation Rate and Should be Determined by the Design Engineer and/or the Installing Contractor; Lifetime Limited Warranty; Made in USA

Size 7.25 Inch Width x 3.5 Inch Depth x 7.5 Inch Height; Input Supply Rating 120 Volt AC 60 Hertz; Power Rating 9.2 Watt; Wire Gauge 18 AWG

Specifications

GSA Item
No
End Connection
Male Threaded
Pipe Size
1/2 Inch x 1/2 Inch
Pressure Rating
20 to 100 PSI
Applicable Standard
ASSE 1044
Inclusions/Features
Stainless Steel Water Hammer Arrester, EPDM O-Ring, Plastic Piston, DOW 111 Lubricant, Plastic Solenoid Actuation Device, Brass Vacuum Breaker, Electrical Hardware, Brass Extension Nipple
Type
Electronic

Recently Viewed Items

Loading recently viewed products...
Loading product details...