WATTS LF THERM TEMPERING VALVE

Thermostatic Mixing Valve

3/8" x 3/8" x 3/8" x 3/8", Compression x Compression x Compression x Compression, 150 PSI, 80 to 120 Deg F, 0.25 to 2.25 GPM, Lead-Free, Satin Chrome, Brass Body, Buna-N Rubber Disc, 4-Port, H-Pattern, Hot Water, Thermostatic Mixing Valve
Lead-Free Brass Body Construction; Installs Easily Between the Stop Valves and Faucet; Includes Tamper Resistant Locking Nut to Prevent Accidental Mis-Adjustment; Built-In Check Valves Prevent Migration of Hot Water to Cold and Cold Water to Hot Water Piping; Provided with Cap for Three Port Application; Integral Strainer with 40 Mesh Stainless Steel Screens to Filter Out Debris; Meets Requirements of the Buy American Act; Lead-Free
This 3/8 inch Under Sink Guardian® Lead-Free thermostatic mixing valve is used in commercial and residential applications to control the hot water temperature and minimize the potential for accidental scalding. It is suitable for kitchen and bath installations where the water delivered to the fixtures is intended for bathing or washing. The double throttling design controls both the hot and cold water supply to the mixed outlet. This valve consists of a Lead-Free brass body with satin chrome finish, 3/8 inch male compression fittings, copper thermostat, check valves, integral strainer with 40 mesh stainless steel screens and a tamper resistant locking cap. The maximum working pressure is 150 psi (10.3 bar). The water temperature can be field adjusted between 80 to 120 degrees F (27 to 49 degrees C). The recommended maximum temperature is 110 degrees F (43 degrees C).
Lead-Free; Finish Satin, Chrome Plated; Outlet Temperature Accuracy +/-7 Deg F; Cold Inlet Temperature Range 39 to 80 Deg F