WATTS 3/4 IN A.S.M.E. SELFCLOSING

Temperature and Pressure Relief Valve

3/4" x 3/4", MPT x FPT, 150 PSI, 105000 BTU/Hr, Brass Body, Extended Shank, Automatic Reseating, Lever Handle, Self-Closing, Temperature and Pressure Relief Valve with 3" Thermostat Probe
Self-Closing Safety Valve for Hot Water Heaters; Stainless Steel Spring; Bronze Body Construction; Unique Thermostat with Special Thermo-Bonded Coating; Model L100XL Extended Inlet Model for Installations with Thick Insulation; Suitable for Water Heaters with up to 2 Inch of Insulation; Meets Requirements of the Buy American Act
This 3/4 inch extended shank temperature and pressure relief valve is used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. It features an extended shank for installation on water heaters with extra thick insulation as well as a brass body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. It is suitable for water heaters with up to 2 inches (50.8 mm) of insulation. It is ASME rated and CSA listed. The temperature relief is 210 F (99 C), the pressure relief range is 75 to 150 psi (5.2 to 10.3 bars) and the standard pressure setting is 150 psi (10.55 bar).
Pressure Steam Discharge Capacity 105000 BTU/Hour; Thermostat Probe Length 3 Inch; Shank Length 2-1/8 Inch; Overall Dimension 1-7/8 Inch Width