KIDDE/FYRNETICS DIRECT WIRE SMOKE DETECTOR

Smoke Alarm

5.6" x 1.55", 120 VAC, 9 V Battery Backup, 85 dB at 10', Ionization, Smoke Alarm
Front Battery Pull Tab Allows Battery Activation without Removing Alarm from Mounting Bracket; Large Mounting Base Makes Mounting Easier, Protects Surface Paint from Dirt and Covers Imperfections; Pre-Stripped Wiring Harness with Easy Off Cap does not Require Stripper Tool; Tinned Strands Increase Conductivity and Wire Nut Grip; Tamper Resist Locking Feature Deters Alarm Theft; One Button Design for Easy Operation and Less Confusion; Battery Run Down Protection will Shut Down Alarm Memory When AC Power is not Present, Reducing Low Battery Chirp; Dust Cover Protects Sensor from Contaminates During Construction, Reducing Nuisance Alarms
The Kidde i12040A is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Temperature Rating 40 to 100 Deg F; Overall Dimension 5.6 Inch Diameter x 1.55 Inch Depth